When working on a long length of path like this, we each work on a stretch of about ten metres at a time. When that section is completed and joined up with the team member working above, we leapfrog higher up the path and continue like this until the whole length of path is finished.
We've reseeded a couple of times and hopefully now that we're getting a few more showers, the grass will start to grow and cover the bare areas.
As we've moved higher up the path, we've started to encounter more areas of bedrock. Most of this is just below the ground surface and can be removed with a crowbar or sledgehammer if it's in the way of the path. Dealing with bedrock adds an extra layer of complexity to the process of building a path, as well as substantially increasing the level of exertion required.
One notable section was a large outcrop higher up the path. Generally, exposed bedrock like this is much harder and more difficult to break. Since bedrock becomes slippery when wet, many people try to avoid walking on it, which causes more erosion in the area... exposing more bedrock, etc, etc. So rather than stopping the path at the foot of the outcrop, we continued around it until a weaker section was found that could be chipped out to form the new path line.